Timken DL 50 12 needle roller bearings

SW:3.18 mm; N2:32 mm; L1:62 mm; C:14 kN; Z:16.7 mm; T max.:200 °C; H2:51 mm; N1:16 mm; Designation of housing:T205N-; S:14.3 mm;

TypeBevel GearModel NumberOEMDimensionsCustomer′s DrawingsAlloyNi, Mn, Crh, Mo, etcSurface TreatmentAnti-Rust Oil & Polish & ShotCustomizationYesCertificateCCS, ISO9001TechnicalForgingCoatingPainted with Oil/ as OrderDetection100% InspectionTrademarkEVONTransport PackageFiber Wooden

C:35.1 kN; T min.:-20 °C; Designation of closed end cover:SCC210; L1:40 mm; H2:114 mm; G:M6x1; S:19 mm; L:135 mm; d:50 mm; J:95 mm;

Mass:0.02 kg; Dynamic load, C:4.55 kN; f0:12.4; D:26 mm; Characteristic inner ring frequency, BPFI:4.44 Hz; ra max:0.3 mm; B:8 mm; Max operating temperature, Tmax:200 °C; d:10 mm; Brand:NTN;

Characteristic cage frequency, FTF:0.46 Hz; Characteristic rolling element frequency, BSF:10.91 Hz; F:20 mm; Min operating temperature, Tmin:-20 °C; Precision class:P0; Characteristic inner ring frequency, BPFI:12 Hz; Characteristic outer ring frequency, BPF0:10 Hz; d:15 mm; Max operating temperatur

Min operating temperature, Tmin:-20 °C; ra max:1 mm; Max operating temperature, Tmax:120 °C; Mass:0.29 kg; Da max:65.5 mm; da min:41.5 mm; Fatigue limit load, Cu:0.7 kN; Characteristic outer ring frequency, BPF0:3.56 Hz; Characteristic rolling element frequency, BSF:4.61 Hz; Radial clearance class:C

T max.:100 °C; B1:43.7 mm; C:35.1 kN; G:M6x1; A:40 mm; S:11 mm; L:165 mm; A4:28 mm; J:138 mm; B:30.2 mm;

Preload level:7; Nlim (grease):48,000 rpm; Characteristic inner ring frequency, BPFI:6.26 Hz; f0:12.74; Contact angle α:25 °; D1:24.45 mm; Axial rigidity:53 N/µm; Da max:25.5 mm; Min operating temperature, Tmin:-30 °C; Mass:0.03 kg;

Recommended tightening torque for set screw:22 Nm; G:R1/8"; C0:23.2 kN; J:159 mm; H1:22.5 mm; s1:25.8 mm; L:222.2 mm; d:45 mm; N1:32 mm; Weight:3.25 kg;

C0:6.65 kN; e:19 mm; S:17 mm; T max.:200 °C; T min.:-20 °C; A2:45.5 mm; B:34 mm; H:112 mm; d1:32.4 mm; d:12 mm;

k:12 mm; D1:435.4 mm; Nref:800 rpm; Da max:480 mm; Radial clearance class:CN; Dynamic load, C:3,800 kN; Min operating temperature, Tmin:-40 °C; d:240 mm; Static load, C0:4,310 kN; ra max:4 mm;

L:310 mm; C:71.5 kN; T max.:100 °C; J:236 mm; d:50.8 mm; A:80 mm; H1:30 mm; G:M6x1; T min.:-20 °C; Weight:7.68 kg;

B:38.1 mm; J:121 mm; Recommended tightening torque for set screw:3.7 Nm; G:M6x1; Designation of open end cover:SCOU206-18; L1:54 mm; N:17mm; Designation of bearing:UC206-18G2L3; H1:18 mm; Dz:70 mm;

ra max:2 mm; f0:13.3; Characteristic outer ring frequency, BPF0:3.09 Hz; Da max:159 mm; d:80 mm; Mass:3.59 kg; da max:105 mm; da min:91 mm; Characteristic rolling element frequency, BSF:4.15 Hz; Nlim (grease):2,700 rpm;

J:164 mm; Designation of bearing:EX210G2L4; B1:62.7 mm; T min.:-20 °C; H2:114 mm; d:50 mm; L:214 mm; Designation of housing:PLE210-; A:55 mm; H1:19.3 mm;